The built-in Industrial PC C5102 has been designed for installation in a 19-inch rack and is fitted with components of the highest performance class meeting the ATX standard. The C5102 is ideally suited for machine construction and plant engineering applications For Example C5102-0050 Specifications is: -7-slot slide-in housing ATX for 19-inch racks, 4 rack units -all slots for full-length plug-in cards -lockable front flap -card holders -protection class IP 60 when operating -operating temperature 0…55 °C -weight of the basic configuration 17.0 kg (37.5 lbs) -dimensions (W x H x D) 483 x 177 x 500 mm (19" x 7" x 19.5") -processor Intel® Celeron® B810 1.6 GHz, 2 cores (TC3: 50) -ATX motherboard for 2nd and 3rd Generation Intel® Core™ i3, Core™ i5, Core™ i7 or Celeron® -2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and 3 PCI slots free -2 GB DDR3 RAM, expandable to 16 GB -Graphic adapter integrated inside the Intel® processor, 1 DVI-I, 1 DVI-D and 1 DisplayPort connector. 2 of the -3 conectors are usable at the same time. -on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector -on-board SATA RAID 1 controller, Intel® Rapid Storage Technology -hard disk, 3½-inch, 1 TB -4 serial ports RS232 on-board, 1 of these RS232 ports are led out with 9-pin D-sub connectors; -14 USB 2.0, 4 of these USB ports are led out at the rear side and 2 are behind the front flap -PS/2 keyboard socket and PS/2 mouse socket -100–240 V AC full range power supply